Beko WMA 727 S - Manual (Page 33)

EN 33
It does not
rinse well.
The amount, brand and
storage conditions of the
detergent used might not
be appropriate.
Store detergent in a closed and dry place. Do
not keep them under high temperatures.
Detergent might have
been put in the wrong
compartment.
If detergent is put in the prewash compartment
although prewash cycle is not selected, the
machine can take this detergent during rinsing
or softener step.
Machine filter may be
clogged.
Check the filter.
Drain hose may be folded. Check the drain hose.
Intermediate spins may be
skipped.
There may be an imbalance of laundry in the
machine.
The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
No spinning is performed when the laundry is
not evenly distributed in the drum to prevent
any damage to the machine and to its
environment.
Clothes
stiffened.
Insufficient amount of
detergent used.
If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
The detergent may have
been placed into the
wrong compartment; the
detergent may be mixed
with the softener.
If detergent is put in the prewash compartment
although prewash cycle is not selected, the
machine can take this detergent during rinsing
or softener step.
Softener should not come into contact with
detergent when being added.
Wash and clean the drawer with hot water.
Clothes do not
smell like the
softener.
Insufficient amount of
detergent used.
If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
The detergent may have
been placed into the
wrong compartment; the
detergent may be mixed
with the softener.
If detergent is put in the prewash compartment
although prewash cycle is not selected, the
machine can take this detergent during rinsing
or softener step.
Softener should not come into contact with
detergent when being added.
Wash and clean the drawer with hot water.