MARVEL Scientific 8CRF - Manual (Page 12)

Cleaning instructions
Condenser
The condenser underneath the cabinet does not require fre-
quent cleaning; however, satisfactory cooling depends on ad-
equate ventilation over this heat exchanger. It is recommended
to annually clean the condenser by vacuuming and brushing.
To access the condenser, the unit must be pulled out from the
installation, and the lower machine compartment access cover
removed.
Disconnect the power cord before cleaning the condenser.
Be sure that nothing obstructs the required air flow openings
in front of the cabinet. At least once or twice a year, brush or
vacuum lint and dirt from the front grille area (see page 4).
Cabinet
The painted cabinet can be washed with mild soap and water and
thoroughly rinsed with clear water. NEVER use abrasive scouring
cleaners.
Interior
Wash interior compartment with mild soap and water. DO NOT
use an abrasive cleaner, solvent, polish cleaner, or undiluted de-
tergent.
Glass Door (optional)
Use a glass cleaner or mild soap and water, and soft cloth to clean
the glass door model. DO NOT use any abrasive cleaners.
Door Gasket
The vinyl gasket may be cleaned with mild soap and water, a bak-
ing soda solution, or a mild scouring powder.
CARE AND CLEANING
12