Bizfon Conference Series - Manual (Page 9)

Getting Started
Bizfon Conference Series Phone User’s Guide 5
Figure 2. Power Adapter
After you plug in the conference phone, it
plays a static sound and five short tones as it
scans the room. This automatically deter-
mines the room size and the conference
phone adjusts itself for optimum sound qual-
ity. The conference phone is now ready to
receive or make calls.
Setting up the
Extension to
Which the Con-
ference Phone
is Connected If your conference phone is not connected to
a Bizfon 680, you may skip this section.
When you first use the conference phone,
you are prompted to set up the extension if
you have not previously done this. Refer to
the Bizfon 680 Owner’s Guide for details
about resetting and setting up extensions.
The first time you press POWER, the system
prompts you with the following:
Connect SHORT cord from
LINE jack of power adapter
to an extension port on your
Bizfon 680 or a standard
telephone jack.
Connect LONG cord
from PHONE jack of
power adapter to
PHONE jack on con-
ference phone.