MEElectronics Air-Fi Matrix2 AF62 - Manual (Page 6)

CONNECTING TO PAIRED DEVICES
*** The Matrix must have been previously paired
with your device before you can connect ***
When the Matrix is turned on and not in pairing mode, it should connect to the
last connected device automatically. If the last connected device discoverable,
the Matrix will connect to other paired devices in the order of last connection.
If the Matrix does not connect and remains in standby mode, a short press
of the Play/Pause button will connect to the last connected device with
Bluetooth on and within range.
Note: On some PC and Mac computers you will need to manually enable
Bluetooth audio every time you connect
USING THE MATRIX HEADPHONES
Adjusting Volume
Note: In standby mode and while playing media with most devices, volume
adjustments will only change the volume of the Matrix. Adjust device volume
as needed to further increase or decrease the volume. During a phone call the
Matrix will control device volume. Some newer devices use AVRCP 1.3 Bluetooth
Profile, which will allow the Matrix to change the device volume at all times.
Function
Increase
volume
Decrease
volume
Operation
Single press or press and hold the
Volume Up button
Single press or press and hold the
Volume Down button
Notes
When the volume reaches the
minimum or maximum level the
Matrix will produce a short tone.
PAIRING WITH BLUETOOTH DEVICES USING NFC
Note: When the volume reaches the minimum or maximum level there will
be two short tones.
Put the Matrix in pairing mode
Place the NFC-compatible device against the left ear cup of the Matrix until
pairing is complete.
A dialog box should automatically appear; if the dialog box does not
appear, re-position the device until it does
Follow the instructions on the screen to pair the device with the Matrix
a)
b)
c)
d)