MEElectronics Air-Fi Matrix2 AF62 - Manual (Page 8)

USING THE MATRIX HEADPHONES (Continued)
Additional Functionality
Action / Status
Activate voice
command / dialing 1
Button Function
Single press the Power button
Sounds
Short tone
1 Not all devices support this functionality. For more information, refer to the user manual
for your device.
USING AS A WIRED HEADPHONE
The Matrix comes with a 3.5mm audio jack on the left ear cup and an audio
cable for wired use. This allows use with in-flight entertainment devices,
devices that don’t have Bluetooth or aren’t paired, or when the battery is
depleted.
The Matrix can be used wired while still connected via Bluetooth to another
device. Bluetooth audio takes precedence over wired audio; if a Bluetooth
device is connected while listening to wired audio, wired audio will partially
mute when audio is transmitted via Bluetooth. Wired audio will resume
approximately 10 seconds after the Bluetooth transmission ends.
SAFETY AND CARE
When not in use, power the headphones off and store in the included
protective pouch.
Clean with a soft cloth, damp with diluted soap water solution if
necessary. Never use chemical cleaners.
There are no user replaceable/reparable parts in the headset.
Disassembling it will void your warranty.
Do not expose the headphones to liquids. If submersed in water, do not
turn the device on until completely dried.
Note: liquid submersion voids the warranty.
Battery performance will be severely decreased when stored in extreme
temperatures: below -10°C/14°F or above 45°C/113°F.
a)
b)
c)
d)
e)
SPECIFICATIONS
See the Air-Fi Matrix product page at www.meelec.com for product
specifications.
TROUBLESHOOTING
Please visit www.meelec.com/bluetooth for the troubleshooting information