MEElectronics Air-Fi Metro AF71 - Manual (Page 21)

18
Pairing (Continued)
Other Phones, Tablets, and Devices
Please refer to your device manual for instructions on how to pair
Bluetooth devices
On your device, turn Bluetooth on and go to the appropriate pairing
window
Make sure the Metro AF71 is off and within 1 meter of your device
Make sure Bluetooth is enabled on your device and you are in the
Bluetooth screen
Turn on the Metro by pressing the Multifunction button for
approximately 8 seconds, until the red and blue LEDs flash in an
alternating manner
(Note: The Metro will stay in pairing mode for 2 minutes.
If no devices pair within 2 minutes, the Metro will return to standby
mode automatically.)
Wait until you see “AF71” in the list of Bluetooth devices
Tap or click on “AF71” to pair and connect your device to the Metro;
if your device asks for a pin, enter “0000”
The Metro will beep twice upon pairing and connection and “AF71”
should show “connected” on your device; the blue LED on the
Metro will flash twice every 4 seconds to indicate a connection
If pairing fails after several tries, please refer to the Bluetooth
device’s user manual for further information.
a)
b)
c)
d)
e)
f)
g)
h)
For additional information on Bluetooth and pairing videos,
please visit
meelec.com/bluetooth
.
Note: After pairing is successful, the Metro and device will remember
each other and not need to re-pair again. The Metro can remember
up to 8 paired devices; when the number of paired devices exceeds
8, the oldest previously paired device will be replaced.