MEElectronics Air-Fi Metro AF71 - Manual (Page 22)

19
Connecting to Paired Devices
Connecting:
When the Metro is turned on and not in pairing mode, it will
connect to last connected device automatically. If the last connected
device is not within range or does not have Bluetooth on, the Metro
will connect to other paired devices in the order of last connection.
If the Metro does not connect and remains in standby mode, a short
press of the Multifunction button will connect to the last connected
device with Bluetooth on and within range.
Notes
** The Metro is equipped with Multipoint, which allows
simultaneous connection to two devices. Multipoint is turned
off by default and will need to be turned on prior to use. **
Multipoint Use
Multipoint allows users to connect two devices simultaneously.
For example, it is possible to listen to streaming audio from one
device such as a computer, tablet, or dedicated media player while
still being connected to your phone with the ability to take incoming
calls without having to remove your Metro. During an incoming call,
the Metro will pause the audio stream and resume it after the phone
call is over.
On some Bluetooth devices, such as some Nokia and Blackberry
cell phones, the settings must allow for automatic connection.
Please refer to your devices manual for further information.
On some Mac
® and PC computers you will need to manually
enable Bluetooth audio every time you connect.
•
•