MK Diamond MK-MANTA IV - Manual (Page 4)

MANTA IV Core Drill Revision 08/06, Effective Date August 22, 2006

General Safety Instructions for the MANTA IV Core Drill
For your safety!
These safety precautions should be followed at all times. Failure to follow these safety precautions could
result in injury to yourself and others.
( (
)
)
DO NOT operate this machine unless you have read and understood this operator’s manual.
DO NOT leave this machine unattended while the motor is running.
DO NOT work on this machine while the motor is running.
DO NOT operate this machine when you are tired or fatigued.
DO NOT operate the machine if you are uncertain of how to run the machine.
DO NOT use damaged equipment.
DO NOT operate this machine in the vicinity of anything that is flammable. Sparks could cause a fire or an explosion.
DO NOT operate this machine unless you are specifically trained to do so.
DO NOT lay power cords in or near the water.
DO NOT operate this machine while using drugs or alcohol.
DO NOT use this machine standing on a ladder.
DO NOT drill into materials that contain asbestos.
DO NOT touch rotating parts.
DO NOT allow anybody under 16 years of age run the machine.
Modifications to this tool are prohibited.
If the machine stops for any reason, switch it off to avoid any sudden starts.
This machine has to go through visual inspection by a specialist on regular intervals.
When using water as coolant, DO NOT allow water to get into the motor.
Overhead drilling is allow only when suitable safety measures are taken (water collection)
Stop working if water starts dripping from overrunning bore hole. Take machine to be serviced.
If machine breaks down do not turn it on if the drill bit can be turned.
Wear eye, breathing, ear and head protection.
This manual has been prepared to provide complete instructions for operation and maintenance of the MANTA IV
CORE DRILL. For additional instruction concerning motor operations and care refer to the motor manufacturers
instructions. Before using this equipment, ensure that the person operating this machine has read
and understands all instructions in this manual. Precaution is the best insurance against accidents. Read
and observe all safety precautions.
If the power cord gets damaged or cut during use, do not touch the live wires. When this happens pull the plug out
of the socket immediately. Never use the tool with a damaged cable.
When drilling in ceilings or walls make sure you will not cut through electrical mains, gas or water pipes. Use metal
detection devices if needed. Prior to start of your work, make sure to determine the exact drilling position so you do
not drill on walls that have electrical connections.
If drilling through ceilings, secure the piece of material that will be cut out because it might fall downward.
The tool must not be used in rainy or wet conditions.
Contents
The carton box contains the following items:
• Diamond Core Drill • Rig
• Ball Valve • Water Connector
• GFCI protective switch • User Manual
• Warranty Card
Application for Intended Purpose
• The diamond core drill is intended for professional use and may be used only by instructed personnel.
• The tool may be used only for wet cutting of concrete stone and masonry with an appropriate drill bit.
• The tool needs to be mounted before use.