Mmf opos driver v1.9 installation, Table 2.0, Figure 1.1 usb test utility installation – MMF POS 12V PoweredUSB Interface Kit User Manual
Page 2: Step 1
PoweredUSB Interface Board
Instruction manual / User Guide
Approved Date of Revision 5/1/2010 Doc. PoweredUSB
Instruction Manual
TABLE 2.0
LED
NAME
COLOR
STATE
ON
OFF
Solid
LED-1
Red
5V Power (for PCB) ON
No 5V Power (for PCB)
LED-2
White
Cash Drawer Closed
Cash Drawer Open
LED-3
Yellow
Solenoid in position and
ready to kick drawer open
Solenoid kicked drawer
open
LED-4
Green
12V Power (Solenoid) ON
No 12V Power (Solenoid)
FIGURE 1.1
USB TEST UTILITY INSTALLATION
MMF Cash Drawer Company USB CRDemo
A CD with the utility drivers and test utility (See Figure 1.1) is
included with the cash drawer. The drivers and test could
also be found by logging on to:
LEGEND
Action
Result under
Assigned Drawer #
Not Present
N
Closed
C
Opened
O
Download the MMF USB Driver and Test Utility file by opening the zipped file.
» Open folder named “MMF USB_Setup”
» Click on the “Setup” Icon
» Click on “Run”
» Follow through the automatic setup
» After download is completed, go to “Start” Menu
» Go to “All Programs”
» Select the “MMF Cash Drawer Company USB CRDemo” program
Click Status, a result letter character (N/C/O) should appear in the result box under the
cash drawer number given to the unit by setting the dip switch (Step 1-Getting Started)
Make sure cash drawer is closed and the letter ‘C’ appears in the result box.
Click ‘Kick’ to open the cash drawer, the letter ‘O’ should now appear in the result box.
Repeat if necessary
MMF OPOS DRIVER V1.9 INSTALLATION
STEP 1
Install MMF OPOS Driver V1.11, available under:
The user installing the MMF cash drawer software and configuring the cash drawer devices on Windows 2000 and
Windows XP is required to have Administrator Rights. Once the software is installed, all users with normal rights
can use it.