MMF POS 12V PoweredUSB Interface Kit - Manual (Page 3)

PoweredUSB Interface Board Instruction manual / User Guide
Approved Date of Revision 5/1/2010 Doc. PoweredUSB
Instruction Manual
STEP 2
To install the driver run the file: Setup.exe.
The program will ask you to unzip, click Unzip.
» After download is completed, go to “Start” Menu
» Go to “All Programs”
» Select the “MMF Cash Drawer” program
» Select the “Configure and Test” program
STEP 3 FIGURE 1.2
Open the “Configure and Test”
program and click on “Configure
Device”. (See Figure 1.2)
STEP 4
To configure drawer - click on
“Add new drawer” called
Cash_Drawer#1. Type all the
settings as illustrated on the
configuration screen (See Figure
1.3) and click “OK” to save
settings.
FIGURE 1.3