MotorGuide Saltwater - Manual (Page 37)

MAINTENANCE
eng
33
NOTE: If the propeller pin is bent, replace the propeller pin.
a - Propeller pin
b - Propeller
c - Propeller nut
d - Propeller
wrench
Recommended MotorGuide Accessory Description Part Number
MotorGuide Prop Wrench Kit MGA050B6
INSTALLING THE PROPELLER
1. Rotate the motor shaft to insert the propeller pin horizontally.
2. Install the propeller onto the motor shaft by engaging the propeller
onto the propeller pin.
3. Install the propeller nut. Tighten securely.
4. Use a MotorGuide propeller wrench or pliers to tighten the propeller
nut another ¼ turn.
Great White Saltwater Models Only
Corrosion on the metal components of the trolling motor occurs when
two or more metals that are dissimilar are brought into electrical contact
underwater.
The use of a sacrificial anode causes all of the other metals on the
trolling motor to become the cathodes. The anode will corrode and the
trolling motor will not.
Maintenance: If excessive corrosion occurs, replace the anode.
Recommended MotorGuide Accessory Description Part Number
Sacrificial Anode Kit MAR00204
a
b
c
d
45696