MTS Series 248 Actuators - Manual (Page 25)

Pedestal Base Specifications
Series 248 Actuator Product Information Introduction 25
419.1 16.5 368.3 ‡ 14.50 ‡ 23.1 0.91 370.0 14.57
419.1 16.5
419.1 § 16.50 § 23.1 0.91 370.0 14.57
M ODEL E F G
MM IN MM IN
248.0x 3/4”-10 UNC-2B 25.4 1.0 228.6 9.0
3/4”-10 UNC-2B 25.4 1.0 228.6 9.0
3/4”-10 UNC-2B 25.4 1.0 228.6 9.0
3/4”-10 UNC-2B 225.4 1.0 228.6 9.0
248.1x 1”-8 UNC-2B 38.1 1.5 279.4 11.0
1”-8 UNC-2B 38.1 1.5 279.4 11.0
1”-8 UNC-2B 38.1 1.5 279.4 11.0
1”-8 UNC-2B 38.1 1.5 279.4 11.0
248.2x Does not include four tapped holes in base.
M ODEL A B C D
MM IN MM IN MM IN MM IN
* Applies to actuators with 25.4 or 50.8 mm (1 or 2 in.) stroke.
† Applies to actuators with 101.6 or 152.4 mm (4 or 6 in.) stroke.
‡ Applies to actuators with 203.2 or 254.0 mm (8 or 10 in.) stroke.
§ Applies to actuators with 304.8 mm (12 in.) stroke.