Black Box PROTOCOL CONVERTER A/S-4 - Manual (Page 50)

CHAPTER 6: Power Up and Configuration Menu Options
49
The following is an example of setting the printer for 8 lines per inch.
ESC, 8 - OKI Microline 83A command to set 8 LPI
Printer Options Menu settings:
H-Multiple-(`xxx’ X inches)-xxx=001
K-Start Char-DENSITY=ESC
L-Separator Char-DENSITY=CTL @
M-Final Char-DENSITY=CTL @
ESC,[,90, ,G - GENICOM 3000 command to set 8 LPI
Printer Options Menu Settings:
H-Multiple-(`xxx’ X inches)-xxx=720
K-Start Char-DENSITY=ESC [
L-Separator Char-DENSITY=space
M-Final Char-DENSITY=G
6.13 Verify Switch Settings
To check the settings of the switches used for the terminal’s baud rate, data bits, parity and other
selections, enter the letter J in response to the Main Menu. The Verify Switch Settings menu will then be
displayed on your screen as in Figure 18.
CURRENT:
Application = SDLC/SNA 3274/76 Interactive
VDU = ANSI STD; DEC VT100; Teletype 5410,5420; Televideo 970,960
Keyboard = STANDARD
Verify Switch Settings
A-Exit
B-Restart With New Switch Options
SWITCH SETTINGS
SW6 (NOs. 07-10)=E
SW7 (NOs. 07-10)=F
SW8 (NOs. 01-08)=FF
SW9 (NOs. 01-08)=0B
Figure 18