Black Box PROTOCOL CONVERTER A/S-4 - Manual (Page 68)

CHAPTER 12: System/Line Gen for Batch
67
TRANSFER = 7
MODETAB = INSTINCLM Name of table used by VTAM for line bind parameters
SSCPFM = USSSCS 3770 RJE log-on is a character-coded log-on
VPACING = 2
—————- PU MACRO —————-
ADDR = C1 Line hardware hex address value
IRETRY = YES Retry poll operation on idle PU, maybe no
MAXDATA = 265 or 521 Maximum amount of (PIU) data NCP will xmit to the
terminal
MAXOUT = 7 if MAXDATA = 265 Maximum number of data blocks (PIUs)
4 if MAXDATA = 521 that NCP can xmit to PU before requesting an SDLC data link
acknowledgement
MODETAB = RJEMODE Name of table used by VTAM for PU bind parameters
PASSLIM = 7 if MAXDATA = 265 Maximum number of PIUs that NCP can
4 if MAXDATA = 521 xmit at one time
PUTYPE = 2 Physical Unit type 2
RETRIES = (1,3,5) Retry 1, wait 3 seconds, do it 5 times
SSCPFM = USSSCS 3770 RJE logon is a character-coded logon
DLOGMOD = BUF256 if MAXDATA = 265 Logmode entry used
BUF512 if MAXDATA = 521
ANS = STOP Stop on automatic network shutdown, maybe CONTINUE
—————- LU MACRO —————-
BATCH = YES Informs NCP that this is a BATCH LU
BUFFLIM = 2 The product determines how many PPBUF elements VTAM
will receive from a LU until VTAM can transfer the data
to the application
LOCADDR = 1 to 1 Local address of this LU on the PU A/S-4 supports
only one LU
(1) PACING = 3 NCP to send 3 request units (RUs) before waiting for pacing
response