MTS Insight Material Testing Systems - Manual (Page 51)

Controller Connections
MTS Insight™ Material Testing System Installation 51
Crosshead load cell
connector
A connector (D-15) for the load cell is provided under the crosshead on one of
the columns. Pin assignment is as follows:
Pin Signal
1 EX+
2 EX-
3 No Contact
4 FB+
5 FB-
6 No Contact
7 SHIELD
8 TEDS+
9 No Contact
10 EXS+
11 No Contact
12 RCAL1 (FBR+)
13 RCAL2 (FBR-)
14 TEDS-
15 EXS-
Load cell connector
(shown on an Insight 50)