BT Quartet 1500 - Manual (Page 35)

Base settings
The default setting is 3.
WARNING
If you reset the handset and base,
you will lose any names or
numbers stored in the phonebook,
redial list and calls list.
Any other settings will also be set
back to the factory default.
5. Press twice to return to the idle screen.
To change the ringer volume
1. Press .
2. Press or until SETUP is displayed then
press .
3. BASE VOLUME is displayed then press .
4. Press or to select and play a ringer volume then
press .
5. Press twice to return to the idle screen.
Reset the handset and base
1. Press .
2. Press or until SETUP is displayed then
press .
3. Press or until DEFAULT is displayed then
press .
4. Display shows PIN? Enter your 4 digit PIN then press .
Display shows CONFIRM? Press again. Your BT
Studio 1500 will reset itself to the default settings and
you will hear a confirmation beep.
Menu
Menu
Menu
Vol
Menu
Vol
Menu
Menu
Vol
Menu
Menu
Vol
Menu
35