BT Quartet 1500 - Manual (Page 37)

Your BT Studio 1500 answering machine uses voice
prompts to guide you simply through its operation.
You can operate your answering machine from:
The base.
Remotely, from any other Touchtone ® telephone, see
page 46.
Before first using your answering machine you should
set the correct day and time.
Switching the answering machine on/off
1. Press . The machine announces “Answer on” or
“Answer off”. The messages light comes on when the
answering machine is switched on.
Set day and time
You will need to set the day and time so that you know
when each message was received.
Once a message has been played back, the machine will
announce, for example, “Tuesday, four fifty, pm.”
1. Press and hold until you hear the current setting.
Stop
On / Off
Ans
37
Using the answering machine
Ready to record
The answering machine is pre-set to
ON, so it’s ready to record messages
as soon as the base is plugged in.
(Remember to charge the handset
for at least 16 hours first).
Default day and time
The default date and time is
Saturday, 12.01pm. If the power
to the base is lost, the date and
time will revert to this default
setting. Your messages will be
unaffected.
To check current day and time
setting
Press the button.
Stop