Multiquip RX 1510-C/-I/-CI - Manual (Page 75)

RX 1510-C/-I/-CI
– 75 –
Start Stop
F 4 I00
Start Stop
Start Stop
3) Depending upon required compaction force, switch the large or small vibration
on.
4) Drive over the area to be compacted several times, until it is completely
compacted.
5) After completing the compaction work drive the machine to a level area where
it is not an obstacle.
6) Stop the engine. If the machine is parked on a slope, safeguard it with chock
blocks.
CAUTION
The transmitter is ready for use as long as the toggle switch "Start-Stop" is in the
switch position "Neutral".
► Always turn the transmitter off by switching the toggle switch to "Stop" during
breaks and after finishing work.
Operation: