Multiquip RX 1510-C/-I/-CI - Manual (Page 92)

RX 1510-C/-I/-CI
– 92 –
RF
SF
V
Leaking hydraulic oils pollute the soil!
► Collect leaking hydraulic oil and dispose together with the hydraulic oil filter in
an environmentally friendly manner!
► Do not spill hydraulic oil.
► Collect leaking hydraulic oil, do not let it seep into the ground.
ENVIRONMENT
4) Unscrew the threaded plug S and drain hydraulic oil into the container.
5) Loosen the runback filter RF with a spanner wrench, wrench size 27 and
remove.
6) Loosen the screws V with a spanner wrench, wrench size 46.
7) Loosen the intake filter element SF with a spanner wrench, wrench size 70 and
remove.
8) Wash oil tank thoroughly. Clean sealing surfaces of the threaded plug S and
chassis.
9) Mount threaded plug S with new gaskets.
10) Renew SF intake filter.
11) Fill in hydraulic oil through the opening of the runback intake filter until the fill level
has reached the middle of the oil sight glass.
12) Renew RF runback filter.
13) Check the hydraulic system for leaktightness. ► Start engine and run it idle for
a short time. ► Re-examine oil fill level at the oil fill level sight glass and refill
again if necessary. Recommended types of oil see technical data.
Leaking hydraulic oils pollute the soil!
► Dispose hydraulic elements in an environmentally friendly manner.
ENVIRONMENT
Maintaining the machine