Blaupunkt MEMPHIS MP66 7 646 520 310 - Manual (Page 55)

Changing basic settings in the settings menu
119
Activating/deactivating audio
inputs ( Auxiliary 1/2)
Audio inputs, to which you are
connecting external audio sourc-
es, must be activated as follows.
Press the softkey < (next to
"Auxiliary 1") and/or the soft-
key
7 (next to "Auxiliary 2").
The status of the audio input is
displayed:
: The corresponding audio
input is activated and can be
selected as audio source
using the SRC Taste
B .
: The corresponding audio
input is deactivated. It can-
not even be selected as
audio source if an external
audio source is connected.
Renaming audio inputs
( Edit Auxiliary 1/2)
If you select an audio input as
audio source, "Auxiliary 1" or
"Auxiliary 2" appears on the dis-
play. To change this name:
Press the softkey ; (next to
"Edit Auxiliary 1") and/or the
softkey
8 (next to "Edit Auxil-
iary 2").
The text input appears. The
fi rst character of the name is
highlighted.
On the rocker switch 3 , re-
peatedly press or to change
the highlighted character.
➔
•
•
➔
➔
On the rocker switch 3 ,
press to change to the next
character. The name can have
up to 16 characters.
Press the OK button A to fi n-
ish the text input and to store
the name entered.
Note:
To quit the text input without
changing the name, press the
ESC button
@ .
➔
➔
02_BA_Memphis_EU_eng.indd Menü119 02_BA_Memphis_EU_eng.indd Menü119 03.05.2006 10:44:12 Uhr 03.05.2006 10:44:12 Uhr