Multiquip MQD3H - Manual (Page 26)

PAGE 26 — MQD2H/3H DIAPHRAGM PUMPS — OPERATION AND PARTS MANUAL — REV. #7 (05/24/13)
Pump Storage
For storage of the pump for over 30 days, the following is
required:
 Drain the fuel tank completely.
 Run the engine until the fuel is completely consumed.
 Completely drain used oil from the engine crankcase
and fill with fresh clean oil, then follow the procedures
described in the engine manual for engine storage.
 Remove the pump cover and clean inside of pump
housing. Coat inside of pump housing with a light film of
oil to reduce corrosion. A spray can of oil works well for
this application.
 Cover suction and discharge ports with duct tape to
prevent any foreign matter from falling into pump.
 Cover pump and engine with plastic covering or
equivalent and store in a clean, dry place.
PREPARATION FOR LONG-TERM STORAGE