Bissell PowerSteamer 8806 series - Manual (Page 11)

O
peration
Empty the 2-in-1 water tank
1. Remove the 2-in-1 water tank from the base using
the tank carry handle. Carry the tank like a bucket to
a utility sink or outside where you will dispose of the
collection water. Remove the top of the tank by rotating
the handle forward to unlatch lid and lifting lid off tank.
2. Empty collection water from bottom of tank.
NOTE: You may notice hair & debris deposits
on the carpet or in the tank that were
loosened by the cleaning action (especially
with newer carpets that have never been
deep cleaned before). This debris should be
picked up and thrown away.
3. After each use, remove and rinse the lint screen
located on the tank lid.
4. Refill the tank in tank by referencing “Fill the 2-in-
1 water tank” on page 9. Remember to secure the
top of the tank by rotating the handle and test to
make sure it is secure before picking up.
5. Return 2-in-1 water tank to the machine.
NOTE: Always check the level of cleaning
formula in the SmartMix tank at the same
time, and refill as needed.
Rinse (optional)
Rinsing is an optional step that can be done
during the cleaning process by switching to the
water rinse setting, or it can be done after the
carpeted area has been cleaned.
1. Simply choose the water rinse setting on the
SmartMix dial, and follow the same path as you
did for cleaning, taking care to do a forward (wet)
stroke by depressing the trigger, a backward (wet)
stroke, and a forward and backward (dry) stroke,
releasing the trigger. Continue this until the water
you see coming up the nozzle is clear.
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
11
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
1. 2.
3. 4.
5.
When filling bottle or
storing unit, set
dial to:
WATER
RINSE
ug120-4080_7350_908.indd 11 10/14/08 1:28:05 PM