Bissell PowerSteamer 8806 series - Manual (Page 15)

Hard floor cleaning
Your PowerSteamer model may have come with
a hard floor attachment and Hard Floor Solutions
Formula. If not, these products are available for
purchase by contacting the BISSELL Consumer
Services department by phone or on the website.
The hard floor tool provides effective cleaning for
linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed hardwood floors.
1.
Vacuum or Sweep thoroughly to pick up any loose
debris and pet hair.
2. Move any furniture, if needed.
3. Empty any carpet cleaning formula back into the
BISSELL bottle if stored in the formula tank. Fill
formula tank with BISSELL Hard Floor Solutions,
available at many retailers, or contact BISSELL
Consumer Services.
4. Fill the 2-in-1 water tank with hot tap water and
set aside.
5. Attach the hard floor tool onto the floor nozzle with
the long tab to the right side of the floor nozzle. First
attach left side (short tab) catching tab over nozzle
edge. Gently bend long tab (right side) outward to
easily snap over edge of clear nozzle on left.
6. Set the ready tools dial to floor cleaning.
7. Set the SmartMix dial to normal clean.
8. Plug into an outlet and turn the power switch
ON
( I ).
9. Slowly move the machine forward and back over
bare floor surface one time while pressing trigger.
Caution: Do not overwet.
10. Repeat the motion without pressing the trigger.
This allows the hard floor tool to squeegee and
suction up the dirty water.
11. Allow approximately 30 minutes for floors to dry.
12. Remove hard floor tool and rinse and dry
before storing.
13. If any formula remains in the formula tank, pour
it back into the Hard Floor Solutions bottle for use
the next time.
14. Rinse out the formula tank.
M
aintenance and care
15
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Hard Floor
Cleaning Tool
Bottom Front Edge
of Floor Nozzle
Snap Together
ug120-4080_7350_908.indd 15 10/14/08 1:28:08 PM