One for All SV 1620 Smart HDMI switch - Manual (Page 2)

The ONE FOR ALL Smart HDMI Switch uses intelligent switching technology that automatically selects the
right source and works with any certified HDMI device.
(e.g. how to select your Digital TV Receiver that is connected to )
1. Make sure that the device connected to the OUTPUT (e.g. HDTV) is switched ON.
2. Make sure that the devices connected to the INPUTS (e.g. HD STB, DVD Player etc.)
are switched OFF (in standby).
3. Switch ON the device you wish to select (e.g. your Digital TV Receiver that is connected to
) and the ONE FOR ALL Smart HDMI Switch will automatically select the proper INPUT
port e.g.
• If you want to use a different source (e.g. your DVD Player that is connected to ), power OFF the
previous device (e.g. Digital TV Receiver) and power ON the corresponding device you wish to use (e.g.
your DVD Player).
Also, any CEC enabled device (e.g. HD STB, DVD Player etc.) can automatically turn on the ONE FOR ALL
Smart HDMI Switch.
1. Connect the HDMI cables of your source devices (e.g. HD STB, DVD Player etc.) to the
corresponding INPUT ports of the ONE FOR ALL Smart HDMI Switch.
2. Connect the HDMI cable of your TV (e.g. HD TV) to the output port of the ONE FOR ALL
Smart HDMI Switch.
3. Connect the POWER-Adapter and plug it into the mains.
Your ONE FOR ALL Smart HDMI Switch is now READY to use.
How to use
Installation
6
English
AUTO INPUT Switching
MANUAL INPUT Switching
*
(e.g. how to select your Digital TV Receiver that is connected to )
1. Make sure that the device connected to your OUTPUT (e.g. HDTV) is switched ON.
2. Repeatedly press the “(ON/OFF)/INPUT Select” key until the desired INPUT LED on the
ONE FOR ALL Smart HDMI Switch is selected.
• If there’s no video signal on the selected port, the ONE FOR ALL Smart HDMI Switch will return to
automating operation mode.
708774_HDMI_switch_RDN-1090312_INT.PAG.:SV-1620 09-03-12 10:21 Pagina 6