Battery pack – Opticon OPI 4002 User Manual
Page 14
Advertising
Opticon
OPI 4002
Instruction Manual
14
4. Battery
Pack
By default, the scanner is in Power Saving mode. To power on the unit, press the trigger key
for a few seconds. If the scanner is not in use for a while, it will go into sleep mode and the
trigger key must be pressed for a few seconds before scanning to reactivate the unit.
To fully charge the main battery, connect the dedicated AC adapter or plug the scanner into the
charging cradle.
4.1. Using the Charging Cradle
Figure 6 shows the procedure for inserting the OPI 4002 handheld scanner into the CHG
4001 charging cradle.
Figure 6: Inserting the scanner into the charging cradle
Advertising