Opticon OPI 4002 - Manual (Page 6)

Opticon
OPI 4002
Instruction Manual
6
2.2. Product Handling
PRODUCT HANDLING
WARNING
Operate this device in a safe manner. Operating the scanner while operating
machinery or a vehicle can be distracting. No other equipment should be
operated while using this product.
Do not throw this device into a fire. Doing so may cause the battery case to
burst, resulting in injury or possibly acting as an accelerant for the fire.
Do not immerse this product.
Do not insert foreign substances into the device. Doing so may short-circuit or
overheat the battery, resulting in fire or electric shock.
Do not attempt to modify or update this device.
Do not use this product in the following areas. Doing so may cause fire, electric
shock, malfunction, or radio interference:
• In areas exposed to direct sunlight for long periods of time
•
In dusty environments
•
Near water or in extremely high humidity or other liquids
• Near heat sources, such as radiators, heat registers, stoves, or other types
of apparatus that produce heat
• Near microwaves, medical devices, or low-power radio stations. Read more
in the Medical equipment and Radio equipment sections.
Do not use this product near flammable substances (such as gas and
explosives).
PRODUCT HANDLING
CAUTION
When condensation occurs, such as when moving the unit from a cold to a
warm environment, dry the scanner before using it.
When cleaning this product, rub gently with either a soft dry cloth or a damp
cloth with mild detergent. Do not use solvents; they may discolor the device.
Do not drop the unit or set it on an unstable surface from which it could fall.
Do not expose the battery pack to liquids or allow the battery contacts to get
wet. For instance, do not open the battery compartment in areas where water
might come in contact with the battery.