Orbit Baby G3 Toddler Car Seat - Manual (Page 60)

Maintaining Y
our Car Seat
118
118
Maintaining Y
our Car Seat
119
119
Maintaining Your Car Seat
Removing the Upholstery 119
Cleaning the Upholstery 121
Re-installing the Upholstery 122
Other Cleaning Instructions 124
Limited Customer Warranty (United States) 126
The upholstery can be easily removed for
cleaning WITHOUT detaching the restraint
harness from the car seat. Replace
the upholstery once cleaned and dried
completely. DO NOT use the Toddler Car
Seat without the upholstery.
1. Remove the edge of the upholstery
from the car seat shell by pulling it out
from under the rim (Photo A).
2. Pull out the plastic side tabs from the
slots next to each carry handle (Photo
B).
3. Remove the headrest by detaching
the hook and loop fasteners from the
behind the upholstery and pulling it
free from the upholstery (Photo C).
4. Unbuckle the restraint harness. Open
the center panel from top to bottom by
freeing the sides where the shoulder
straps enter (Photo D).
5. Remove the shoulder pads from
Removing the Upholstery
Side
Tab
A
B
C