Orbit Baby Infant Car Seat and generation-one Base - Manual (Page 12)

Be Safe
22
22
Be Safe
23
23
The following types of vehicle seat belts
are NOT compatible with the Infant Car
Seat and Orbit Base:
- Lap, shoulder-lap or shoulder belts
mounted to the vehicle door (See
Illustration A)
- Motorized automatic vehicle seat
belts
- Three point vehicle seat belts
that have separate retractors for
the shoulder section and the lap
section (See Illustration B)
- Vehicle seat belts with
non-locking
retractors
- Lap belts forward of the seat
crease (See Illustration C)
Do not install the Base or Infant Car
Seat using any of the vehicle seat belt
types listed above. Select another
seating position or use LATCH anchors
instead. If you determine that there
Your Vehicle Restraint Options cont’d
are no acceptable vehicle belt systems
in your vehicle, contact the vehicle
manufacturer for options.
The following vehicle seat belt systems
CAN be used with your Infant Car Seat
and Orbit Base when following the
appropriate instructions in this manual:
- Manually adjusted lap belts (See
Illustration D)
- Lap belts with an automatic
locking retractor (See Illustration E)
- Combination shoulder-lap belt with
locking latch plate or sliding latch
plate (See Illustration F).
Your Vehicle Restraint Options cont’d
A
B
C
D
E
F