BUSH DVD Player With Integrated High Definition Digital Set Top Box DFTA49DVD - Manual (Page 16)

Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9
Widescreen or Auto to get the maximum display when watching TV.
Resolution
If the video does not appear correctly, change the setting. This setting is to
match the most common setting for HDMI.
TV format
If the video does not appear correctly, you need to change the settings. This should
match the most common setting for TVs in your country.
[
NTSC
]:
for NTSC system TV
.
[
PAL
]:
for PAL system TV
.
10
LCN (Logical channel number)
In the Program Menu you can set the LCN to on or off.
Managing your Picture Settings
To access the Picture Menu, press the Setup Button and then select Picture. The
Picture Menu allows you to manage your picture settings as shown below. Press the
Up or Down Buttons to select an option and then press the Right or Left Buttons to
adjust that
setting
.
Press the Exit Button to exit the menu
,
when you
have finished
.
Note: The unit doesn't suppor t the video output through HDMI and RCA at the same
time as this is not required. If the HDMI connection is being used you will not need to
use the RCA also and the Set Top Box will not output through RCA.