PIAA RS800 H.I.D. Shock Lamp - Manual (Page 8)

BULB CHANGE METHOD
The customers should not do
the installation work.
7.
•Never change the bulb when the lamp switch is turned on. Abnormal electric
discharge occurs, and electrification might result. It can be very dangerous.
(1) Remove two screws at the bottom
of the lamp.
screw
Lens unit
Water proofing cap
Igniter socket
Clip
Tab
screw
(2) Raise the lens unit by lifting the bottom
of the lamp. Then, remove the tab at
the top of the lamp.
(4) Turn the igniter socket to the left and
remove it by pulling towards you.
(3) Remove the clip and water proofing cap
as shown.