PLX Devices DM-200 OBDII - Manual (Page 24)

Users Guide: iMFD User Guide
Version 1.0 Jan 1, 2008
www.plxdevices.com
(408)745-7591
24
8.2 DM-200 Display
Physical Dimensions 2 3/8" (60mm) x 0.7" (18mm)
Display Technology OLED 220 x 176 (38720 pixels)
Color Depth 16 Bit
Viewing Angle 180 Degrees
Polarization None (Viewable with polarized sunglasses)
Power Consumption 0.6 Watts Typical
Cable Length 6ft (~2m)
Operating Temperature 0 - 85 Deg C
9 Revision History
Version 1.0 (1/1/08) Initial release
TERMS OF USE
PLX Devices Inc. does not guarantee product functionality with any ECU, data logger or other devices that uses the output signals. Implementation and
integration of the PLX products with any other device(s) must be done at your own risk. Improper installation and usage may lead to engine damage.
Mount and install PLX products in a location where it does not obstruct the driver’s view and/or ability or safely control the vehicle.
LIMITED WARRANTY
PLX Devices Inc. warrants this product to be free from defects for 1 year from the date of purchase. If applicable, Oxygen sensors and other non-
serviceable items are excluded from stated warranty. Serviceable goods must be determined by PLX Devices to be defective before any warranty or
replacement is issued. PLX Devices’ obligation under warranty shall be limited to repairing or replacing, under the discretion of PLX Devices, any part
proven defective. This warranty is limited to the repair or replacement of parts in the manufactured good and the necessary labor done to affect its
repair or replacement.
SERVICE UNDER WARRANTY
In the unlikely event that your PLX Devices hardware should fail during the warranty period, a Return Material Authorization number (RMA) must be
first retrieved from PLX Devices Customer Support. Support can be contacted through email: [email protected] or by phone: 408-745-7591.
All serviceable goods must be packaged securely with proof of purchase, RMA number, with all shipping charges prepaid and shipped to PLX Devices
Inc. Goods returned under warranty must be received by PLX Devices Inc. within ten (10) business days after the RMA number has been issued. Goods
received after this period is subject to fees for the service of repair or replacement. All repaired or replaced items shall be warranted for the remainder
of the original product warranty.
RETURNS AND RESTOCKING FEE
A 15% restocking fee will apply to applicable PLX Devices products for refund. All returns are to be packed in original condition including packaging,
documentation, manuals, and accessories. Returns that do not include all the accessories and components may be returned to the customer or charged
on a per item basis. The customer assumes responsibility for product until receipt at PLX Devices Inc., shipping via an insurable carrier is
recommended. Any unauthorized shipping charges will be billed to the customer or shipment will be refused.
DISCLAIMER
PLX Devices Inc. shall not be liable for direct, special, incidental, or consequential damages resulting from any legal theory including, but not limited to,
lost profits, downtime, goodwill, damage, injury to persons, or replacement of equipment and property due to improper installation, integration and/or
misuse of any PLX Devices Inc.’s product(s). This warranty applies to the original purchaser of product and is non-transferable. All implied warranties
shall be limited in duration to the said 1 year warranty period.