PLX Devices Legion Gen1 11,000 mAh User Manual

Page 7

Advertising
background image

PLX

devices inc.

www.plxdevices.com

7

Toggling Menus

Sleep Mode

To toggle through the menus, press and release the button located to the right of the Organic LED Display.

To conserve battery power and battery life, Legion automatically turns off the Organic LED Display after

30 seconds of inactivity. Simply press and release the button to turn the display back on.

About Legion Menus

Four different menus may be displayed on Legion’s Organic LED Display. These menus include Time Remaining,

Battery Percentage, Electrical, and Health.

Time Remaining

When the Time Remaining menu is selected, either the Time to Discharge or the Time to Charge will be dis-

played. Time to Discharge will be displayed if nothing is plugged into Legion or if Legion is charging a device.

This simply tells you how much time is left before your Legion battery needs to be charged. Time to Charge will

be displayed if Legion is being charged. This lets you know how much longer you need to charge your Legion

battery for it to reach full capacity. Please note that the time remaining (Time to Discharge and Time to Charge)

does not display the time remaining for your mobile device. The information displayed is information based

soley on your Legion battery.

NOTE: Allow about 15 seconds for Legion to calibrate to the device when charging in or out.

Battery Percentage

The Battery Percentage menu will display the percentage of your maximum battery capacity numerically and

graphically. The remaining battery capacity will also be displayed in mAh.

Electrical

The Electrical menu will cycle through three different screens: Voltage, Current, and Power. These screens will

tell you the voltage of your Legion battery, and the current and power draw of your Legion battery.

NOTE: If nothing is connected to your Legion, you should expect to see a low current (0.05A or less).

Health

The Health menu will alternate between two different screens: Condition and Charge Cycles/Temperature. The

Condition screen will indicate what condition (New, Good, Ok, Poor, Bad, or Replace) your Legion battery is in.

The other Health screen will display how many times Legion has been fully charged as well as the temperature of

the battery in degrees Farenheit and degrees Celsius.

NOTE: Please note that LiPo batteries operate better at lower temperatures.

Advertising