Product care and maintenence – PLX Devices Legion Gen1 11,000 mAh User Manual

Page 9

Advertising
background image

PLX

devices inc.

www.plxdevices.com

9

4

Product Care and Maintenence

Storage

Battery Use and Safety

Your mobile battery device is a product of superior design and should be treated with care. The guidelines below

will allow you to enjoy this product for years to come.

Legion should be stored at room temperature in cool or shaded areas, ideally between 10°C (50°F) to 25°C

(77°F). For long term storage (over 3 months), the voltage should ideally rest between 3.6 V to 3.9 V.

Inspect Legion before and after every use as much as possible to ensure no physical damage or swelling of the

product is evident. Such signs can be an indication of a dangerous problem with the battery that could lead to

bodily injury, property damage, and product failure.

The battery in Legion is not intended to be replaced by the consumer. If you believe the battery is damaged or

needs to be replaced, contact technical support at www.plxdevices.com for inspection and replacement informa-

tion. Only qualified personnel should service this product. Faulty service may be dangerous and may invalidate

any warranty applicable to the device.

Exposure to Heat

Do not operate or store this product in or near a heat source, or under direct sunlight for extended periods of

time. Excessive heat can damage the battery, and may even cause the battery to explode.

Never allow your Legion battery to overheat at any time. Temperatures exceeding 45°C (113°F) for greater than

one hour can cause damage to the battery and may result in fire. Always inspect the battery if it has overheated,

and do not reuse if you suspect it has been damaged in any way.

Exposure to Liquid or Moisture

Do not expose this product to liquid or moisture. Liquids can get into and affect the internal components of the

product, and moisture can lead to corrosion. This may result in product malfunction, fire, and/or electric shock.

Even if Legion appears dry and operating normally after exposure, corrosion can still occur and pose a safety

hazard.

Do not dry a wet or damp Legion with a heat source, such as a microwave oven or hair dryer.

Charger Selection

Use ONLY battery chargers that are designed to charge LiPo batteries, capable of constant current and constant

voltage charging. DO NOT USE Ni-Cd or Ni-MH chargers. Failure to use the proper charger may result in fire,

personal injury, and/or property damage.

If at any time the product begins to balloon, swell, or smoke during charging or discharging, discontinue the

Advertising