Precision Turbo and Engine NLR AMS-1000 Boost Controller - Manual

1
AMS-1000
Multi-Channel Air Management System for Boost Control
Copyright © 2005, All Rights Reserved, NLR, LLC
Clutch Input
Shift Input
Scramble Boost Input
Reduce Boost Input
MAP Sensor +5 Volt
MAP Sensor Ground
AUX Channel Signal
BOOST Channel Signal
+12 Volt Switched
Battery Ground
Solenoid +12 Volt
Boost Solenoid Increase
Boost Solenoid Decrease
Aux Solenoid Increase
Aux Solenoid Decrease
Activation, GPS Input
Aux Channel
Actual
Psi
Boost Channel
Actual
Psi
Target Psi Target Psi
Boost Channel Mode Aux Channel Mode
Options
Menu
Boost
Channel
Setup
Aux
Channel
Setup
View &
Erase
Data Log
Gear Position
Activation Status or
Gear Position Sensor
Voltage.
Clutch Input Status
Shift Input Status
Scramble Input Status
Reduce Input Status
IMPORTANT—A sensor MUST be connected to the Boost channel. If no Sensor
is present a Warning Message will be displayed!
The terminal pin descriptions may also be viewed on screen. See Page 24 of
manual for details.
Click for Index.
Back Next
NOTE—Target Psi is the amount applied to the waste gate and is NOT the actual Manifold Boost Psi!