Precision Turbo and Engine NLR AMS-1000 Boost Controller - Manual (Page 23)

23
Specifications
Normal Operating Voltage— 10 to 16 volts (Controller will function down to 7 volts, Solenoids
need a minimum of 10 volts for proper operation).
Maximum Current— 5 Amps for each Solenoid Output.
MAP Sensor Input— 0 to 5 volts.
GPS Input— 0 to 5 volts.
Overall
Height— .975”
Overall Width— 2.850”
Overall Length— 4.350”
3.850”
2.450”
Click for Index.
Back Next
NOTE—Target Psi is the amount applied to the waste gate and is NOT the actual Manifold Boost Psi!