Precisionsound Jetstream 2 - Manual (Page 13)

13
© Copyright Precisionsound 2014 www.precisionsound.net
Global Page
Tracking
Four buttons turn pitch tracking on/off for each sound. When tracking is on, the
sound’s pitch will be determined by the pitch of the played note.
C3 is the root note at which no pitch tracking is applied.
When tracking is off, the sound’s pitch is the same regardless of the pitch of the
played note.
Envelope
The envelope parameters set the volume of all sounds over time.
Attack: sets the time for all sounds to reach full volume when a note is played.
Decay: sets the duration of the transition between the attack and sustain parts of
the envelope for all sounds.
Sustain: sets the volume of all sounds after the attack and decay parts of the envelope, while a note
is held.
Release: sets the time for all sounds to fade to silence after a note is released.
You can create one-shot sounds by setting Sustain to zero and a short Decay time!