Precisionsound Jetstream 2 - Manual (Page 14)

14
© Copyright Precisionsound 2014 www.precisionsound.net
EQ
The EQ parameters control a customised equaliser for all sounds with a specially
variable bandwidth.
High Gain: sets the volume of the high frequencies for all sounds.
Mid Gain: sets the volume of the mid frequencies for all sounds.
Low Gain: sets the volume of the low frequencies for all sounds.
On/Off: enables or disables the equaliser for all sounds.
Space
The space parameters set the overall stereo field and ambience in which all sounds
are placed.
Stereo: sets the width of all sounds from mono to enhanced stereo, prior to the
convolution effect.
Wet: sets the balance between the dry mix of all sounds and the convolution effect.
Type: sets the type of convolution effect. Thirty two types are available, ranging from simulated
spaces to delays, springs, and hybrid processes.
On/Off: enables or disables the space effects.
Dynamics
The dynamics parameters set the volume of the sum of all sounds, making
compression simple.
RMS: sets the amount of slow compression applied to the signal on the basis of its
average level, prior to the limiting process.
Limit: sets the amount of fast compression applied to the signal on the basis of its loudest peaks.
Boost: sets the amount by which the volume is increased after the RMS and limiting processes.
On/Off: enables or disables dynamics processing.