Precisionsound Hybrid Factory - Manual (Page 4)

4
© Copyright Precisionsound 2011 www.precisionsound.net
Signal flow
The signal from each Element flows through an amplifier module, to a filter, and finally to an effects
bank. The signal flow is independent for each Element:
The amplifier, filter and effects provide the following controls over the sound of each Element:
The amounts of phaser, chorus, delay and reverb applied to each Element are independently
adjustable, but the Elements share common parameters for these effects:
• The phaser and chorus effects share an adjustable speed parameter.
• The delay effect has adjustable time, treble damping, stereo width, and feedback
parameters.
• The reverb effect has adjustable type, treble damping, pre-delay, and size parameters.
Lastly, the Elements share three modulation parameters:
• Modulation of the filter cutoff by the modwheel (MIDI CC1).
• Modulation of the filter cutoff by velocity.
• Modulation of note volume by note velocity (also known as velocity sensitivity).
In the next part of the manual, you will learn how the instrument architecture is represented on the
Hybrid Factory interface.
Element 1
Amplifier
Filter
Effects
Element 2
Amplifier
Filter
Effects
• Volume, Tuning, Stereo Width, Pan
• Envelope Attack, Decay, Sustain, Release
Amplifier
• Cutoff, Resonance, Filter Type, Envelope Strength
• Envelope Attack, Decay, Sustain, Release
Filter
• Phaser, Chorus, Delay, Reverb
• Tube, Crunch, Grit, Treble Damping
Effects