Bifinett KH 700 - Manual (Page 6)

11 10
• Place the blender jug in
the opening and turn it
anti-clockwise until
seated tightly.
• Place the lid on the
blender jug and turn it
anti-clockwise until sea-
ted tightly.
• Fill the ingredients in the
blender jug. Cut them
into smaller pieces
beforehand if required.
• If required, insert the
splash protection cap
and turn it anti-clockwi-
se to secure.
• Switch on the blender
by setting the speed
controller to the desired
speed.
• When you have finis-
hed, switch off the
blender and first remove
the lid by turning it
clockwise.
• Then remove the blen-
der jug by turning it
clockwise.
Hints:
• You can add your ingredients to the blender
jug through the opening in the lid during
operation. To do so, simply remove the
splash protection cap.
• If you process hot liquids, remove the
splash protection cap to allow the steam to
escape.
• Should ingredients be trapped in the
blender jug during operation, proceed as
follows:
- Switch off the device (speed controller
to speed 0) and pull the plug from the
socket
- Remove the splash protection cap and
the lid
- Remove the trapped ingredients in the
blender jug using the dough scraper.
- Ensure you do not damage the scraper
with the blade!
9 Cleaning
Caution
• On no account must the device be
immersed in water or other liquids! This
can cause electric shock when remaining
liquid comes in contact with live compo-
nents during subsequent operation.
• Exercise special care when cleaning the
blades, the blender jug with installed
blade and the cutting discs. The blades
and cutting edges are extremely sharp!
• Pull the plug from the socket before every
cleaning.
• Wipe the housing with a clean, moist cloth
after each use.
• You can clean the mixing bowl and the lid
in hot soapy water.
• None of the device components are suit-
able for use in a dishwashing machine!
Neither should you use abrasive cleaning
agents for cleaning device components.
• Clean all device components that have
come in contact with foodstuff with deter-
gent and hot water after use.
10 Malfunctioning
• Should the food processor suddenly stop:
- This means that the device has over-
heated and the integrated safety cut off
has switched off the food processor.
- Pull the plug from the socket
- Set the speed controller to speed 0
- Allow the device to cool down for 15
minutes
- If the device has not cooled off com-
pletely after 15 minutes, it will not start.
Wait another 15 minutes before switch-
ing it on again.
11 Warranty, Repair & Customer
Service
This device has a 3-yearswarranty from the
date of purchase as per our standard busi-
ness conditions and proper use and mainte-
nance.
To prolong the lifespan of your food proces-
sor, follow the directions given under
„Cleaning & Maintenance“.
In case your food processor fails to function
as expected, it must be given for repairs to a
service centre authorised by the manufacturer
or a qualified technician. For this purpose,
please contact our customer service. The
address is given in the enclosed warranty
certificate.
12 Disposal
This device must not be disposed with
household waste, because it contains materi-
als that have to be disposed separately.
Consult your city or community administrative
authorities about procedures for the environ-
ment friendly and systematic disposal of the
food processor.
KH700_Kuechenmaschine_UK 24.11.2003 13:55 Uhr Seite 13