MacDon 963 Harvest Header - Manual (Page 15)

14
HEADER OPERATION
PRE-STARTING CHECKS: ANNUAL
Do the following at the start of each operating
season.
CAUTION:
1. Review the Operator's Manuals to refresh
your memory on safety and operating
recommendations.
2. Review all safety signs and other decals on
the machine and note hazard areas.
3. Be sure all shields and guards are properly
installed and secured. Never alter or
remove safety equipment.
4. Be sure you understand and have practised
safe use of all controls. Know the capacity
and operating characteristics of the
machine.
5. Check the first aid kit and fire extinguisher.
Know where they are and how to use them.
Also:
6. Install drapers. See "Drapers" in Maintenance
/Service section, page 47.
7. Adjust belt, draper and chain tension. See
Maintenance/Service section.
8. Perform all Annual Maintenance. See Mainte-
nance/Service section, page 52.
PRE-STARTING CHECKS: DAILY
Do the following each day before start-up:
CAUTION:
1. Clear the area of other persons, pets etc.
Keep children away from machinery. Walk
around the header to be sure no one is
under, on or close to it.
2. Remove foreign objects from the machine
and surrounding area.
3. Wear close fitting clothing and protective
shoes with slip resistant soles.
As well, carry with you any protective
clothing and personal safety devices that
COULD be necessary through the day.
Don't take chances.
You may need:
- hard hat
- protective glasses
- heavy gloves
- respirator or filter mask
- wet weather gear.
4. Protect against noise.
Wear a suitable hearing
protective device such
as ear muffs or ear
plugs to protect against objectionable or
uncomfortably loud noises.
5. Check the machine for leaks or any parts
that are missing, broken, or not working
correctly.
NOTE: Use proper procedure when
searching for pressurized fluid leaks. See
"Hydraulic System" in Maintenance/Service
section, page 40.
6. Clean all lights and reflective surfaces on
the machine.
7. Perform all Daily maintenance. See
Maintenance/Service section, page 52.