Retsch SR 300 - Manual (Page 8)

2/8/2012

Retsch GmbH
8
0002
Shipping and installation
Target group: Owners, freight forwarders, operators
Packing
The type of packaging used has been selected in accordance with the
shipping mode. It complies with generally accepted packaging guide-
lines.
Please retain the packaging for the duration of the guarantee period
since, in case a claim arises, your guarantee entitlements will be jeop-
ardized if the unit is returned in unsuitable packaging.
Fig. 1
Shipping
Use the eye bold H whenever you are moving the SR 300. Fig. 1
The SR 300 may not be subjected to impact or vibration during trans-
portation; it must not be thrown. The electronic and mechanical com-
ponents could otherwise be damaged.
Temperature fluctuations
In case of wide temperature fluctuations (during shipment by air, for
instance) the SR 300 will have to be protected against condensation;
the electronic components could otherwise be damaged.
Intermediate storage
Ensure that the SR 300 is also kept in a dry place during inter-
mediate storage.
Requirements for the installation site
Ambient temperature
The ambient temperature should be between 5°C and 40°C.
When the ambient temperature exceeds or falls below that specified,
the electronic and mechanical components may be damaged, and per-
formance data changed to an unknown extent.
Humidity
Maximum relative humidity 80% at temperatures up to 31°C;
linear decline down to 50% relative humidity at 40°C.
At higher humidity, the electronic and mechanical components may
be damaged, and performance data changed to an unknown extent.