Retsch PT 200 - Manual (Page 12)

Technical data
12
CAUTION
Risk of explosion or fire
–
On account of its design, the device is not suitable for use in hazardous
(potentially explosive) atmospheres.
• Do not operate the device in a hazardous atmosphere.
Pos : 5.3 /00005 Übersc hriften/1.1 Ü berschriften/1.1 Ü bers chriften BDA/11 Eins atz der M asc hine bei besti mmungsgemäß er Ver wendu ng @ 0\mod_1226476732248_9.doc @ 3243 @ 2 @ 1
4.1 Use of the machine for the intended purpose
Pos : 5.4 /00010 Bedienungsanlei tungen Kapitelsamml ung en/PT 200 ( 2011)/0010 PT 200 Tec hnisc he D aten/1505 PT 200 Ei ns atz der Mas chi ne bei besti mmungsgemäßer Ver wendung @ 3\mod_1302767119062_9.doc @ 24650 @ @ 1
This device is suitable for the representative division and sampling of pourable,
disperse products with a feed size up to a max. 10mm.
With a maximum feed size of 26 litres, a minimum fraction of 100ml should be
observed.
In view of its mode of function this device is also suitable for installation in
continuously operating preparation systems.
Pos : 5.5 /00004 War nhi nweis e/H 0007 H INWEIS Eins atz bereic h des Gerätes 8 Stündiger @ 1\mod_1236240219096_9.doc @ 7693 @ @ 1
NOTICE
Area of use of the machine
– This machine is a laboratory machine designed for 8-hour single-shift
operation.
• This machine may not be used as a production machine nor is it
intended for continuous operation.
Pos : 5.6 /00005 Übersc hriften/1.1 Ü berschriften/1.1 Ü bers chriften BDA/11 Emmisionen @ 0\mod_1226487095021_9.doc @ 3310 @ @ 1
4.2 Emissions
Pos : 5.7 /00010 Bedienungsanlei tungen Kapitelsamml ung en/PT 200 ( 2011)/0010 PT 200 Tec hnisc he D aten/0540 PT 200 Emissionen @ 3\mod_1301572504855_9.doc @ 24361 @ @ 1
Noise details
Noise measurement to DIN 45635-31-01-KL3
The noise values are also influenced by the properties of the sample material.
Example 1:
– Sound power level SWL = 69 dB(A)
– Emission value with regard to workplace LpAeq = 63 dB(A)
Operating conditions:
– Receptacle: glass bottle 500ml and collecting receptacle 26 litres
– Feed material: quartz approx. 0.1 – 3.0mm
Pos : 5.8 /00005 Übersc hriften/1.1 Ü berschriften/1.1 Ü bers chriften BDA/11 Schutzart @ 0\mod_1226491839164_9.doc @ 3328 @ @ 1
4.3 Degree of protection
Pos : 5.9 /00010 Bedienungsanlei tungen Kapitelsamml ung en/PT 200 ( 2011)/0010 PT 200 Tec hnisc he D aten/0545 PT 200 Sc hutz art @ 3\mod_1301572505496_9.doc @ 24370 @ @ 1
IP40
Pos : 5.10 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 Antrieb @ 1\mod_1240475743011_9.doc @ 8557 @ @ 1
4.4 Drive output
Pos : 5.11 /00010 Bedi enungsanleitung en Kapitels ammlungen/PT200 (2011)/0010 PT 200 T ec hnis che D aten/0 520 PT 200 Antrieb @ 3\mod_1301572513449_9.doc @ 24424 @ @ 1
Stepping motor
Pos : 5.12 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 Drehz ahl @ 1\mod_1240476189383_9.doc @ 8585 @ @ 1
4.5 Rotation speed
Pos : 5.13 /00010 Bedi enungsanleitung en Kapitels ammlungen/PT200 (2011)/0010 PT 200 T ec hnis che D aten/0530 PT 200 M otordr ehz ahl T eilrohr @ 3\mod_1301572516965_9.doc @ 24442 @ @ 1
50 revolutions per minute
Pos : 5.14 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 Nennleistung @ 0\mod_1226491873164_9.doc @ 3334 @ @ 1
4.6 Rated power
Pos : 5.15 /00010 Bedi enungsanleitung en Kapitels ammlungen/PT200 (2011)/0010 PT 200 T ec hnis che D aten/0525 PT 200 N ennl eistung @ 3\mod_1301572515980_9.doc @ 24433 @ @ 1