RKI Instruments RP-2009 - Manual (Page 17)

RP-2009 Pump for the GX-2009 14
the wire mesh disk.
7. Reinstall the gasket with the parts into the pump unit.
8. Reinstall the filter holder with the cotton dust filter. Align the
two tabs on the bottom of the filter holder with the two slots
in the pump unit. Push the filter holder into the pump unit
and turn it 1/4 turn clockwise until it snaps into place.
Parts List
Table 2 lists replacement parts and accessories for the RP-2009
pump.
Table 2: Parts List
Part Number Description
07-2005RK Gasket, filter/screen retaining
07-6027RK O-ring, for battery compartment
17-1001RK Tapered rubber nozzle
21-1833RK Filter holder, clear plastic
21-1895RK Battery cap
33-0159RK Hydrophobic disk filter
33-1031RK Cotton ball 25 pack, for replacement of cotton
dust filter
33-1112RK Wire mesh disk filter
49-1120RK AA alkaline battery
80-0009RK-XX Sample hose (optional). Replace “XX” with
length in feet. Available lengths for the RP-2009
are 10, 15, 20, 25, & 30 feet.
80-0150RK Sample probe with dust filter (optional)