Robustel W800 - Manual (Page 32)

Robustel GoFixed W800 User Guide
RT_W800_UG_v02.00
04.11.2011 Page 31 /59
Confidential
Enter the required IP Address and click the Save/Apply button.
3.6.6 Port Forwarding (Virtual Servers)
Go to path Network ‐> Virtual Servers
This page allows the user to forward incoming traffic of selected ports on the WAN interfaces to internal hosts. This
can be used to make internal applications available to the internet (e.g. a web server). Click the Add button to add a
new forward:
z Use Interface to select the WAN interface to forward from.
z Service Name either selects from the list of predefined services (e.g. Web Server (HTTP)) or enters a name for a
custom service.
z Server IP Address enter the local IP Address to forward network traffic to.
z Ports Table if a predefined service is selected the table will be completed automatically. If a custom service is
entered the table must be filled in manually.
— Enter the range of IP addresses to match from the external (WAN) interface (start and end ports can be the
same to match a single IP Address).
— Select the Protocol (TCP, UDP or both TCP/UDP).
— Enter the range of IP addresses to forward to the internal host. These can be the same as the external ports
or the traffic can be forwarded to a different port on the internal host.