Robustel W800 - Manual (Page 39)

Robustel GoFixed W800 User Guide
RT_W800_UG_v02.00
04.11.2011 Page 38 /59
Confidential
3.8 Wireless Configuration (WLAN)
3.8.1 WLAN Basic
Click WLAN to configure the wireless feature of the Gateway.
Go to path: WLAN ‐> WLAN Basic page to enable/disable WLAN feature. Then click Apply/Save button;
z Enable WLAN – select to enable the built‐in WiFi access point.
z Disable SSID broadcast – select to prevent the Access Point from discovering. Users will need to manually
specify the SSID to connect.
z SSID – enter the SSID to identify the WiFi access point, this is the name that will be displayed when users
search for WiFi networks.
z Country – select the country where the CPE is installed
z Max client number – specify the maximum number of wireless clients that will be allowed. The CPE supports
up to 16 simultaneous WiFi connections.
z Channel – select the Wireless channel to use. The channel number can be changed if interference is
experienced.
After entering the required settings click the Apply/Save button.
3.8.2 WLAN Security
Go to path: WLAN ‐> WLAN Security page to set the network authentication method, selecting data encryption,
specify whether a network key is required to authenticate to this wireless network and specify the encryption
strength. Click Apply/Save when done.