S&S Cycle Oil Filter Mount for S&S Alternator/Generator, KN-Series, P-Series, SH-Series, 1986-90 Harley-Davidson Sportster models, S&S Superstock and Special Application Crankcases for Sportster and Buell Models User Manual

Page 2

Advertising
background image

2

Disconnect the battery ground cable to avoid accidental engagement of electric starter.

This kit provides parts and hardware for several different year models of big twin and Harley-Davidson® Sportster® models. Pay attention to existing
engine configurations, oiling system set-ups and routing. It is the responsibility of the installer to correctly identify engine make and to ensure
proper installation of prescribed parts in this kit. Hardware included in this kit are the correct sizes for use with Stock and S&S® manufactured parts or
combination there of, but may not be correct for other aftermarket parts and accessories. Additional fittings are provided for special oil line routing
applications.

1- Remove any dirt or debris from around the front half of the engine and the oil filter mount.

Dirt and other foreign matter can cause extensive damage to oil pump and engine.

Compressed air and particles dislodged by compressed air are potentially harmful. Wear protective goggles when using compressed air
and always direct air stream away from yourself and others nearby.

WARNING

Oil Filter Bracket Kit 106-3134

Item

Part Number

Description

Quantity

1

106-4427

Bracket, Oil Filter

1

2

50-8112

Fitting, 45°, 1/8-27 NPTF

2

3

50-1007

Fitting, 90°, 1/8-27 NPTF, Sold in 5 pack

2

4

50-8115

Hose Fitting, Straight, 1/8-27 NPTF

2

5

50-1015

Taper Pipe Plug, 1/8-27 NPTF, Sold in 10 pack

2

6

50-0190

Screw, SHC, 5/16-24 x 23/4", Zinc, Sold in 5 pack

2

7

106-4793

Screw, SHC, 5/16-24 x 3.5", Zinc

2

8

106-4794

Gasket, Oil Filler Mount, 1936-'69 bt, 1986-'90 xl/sb, Sold in 5 Pack

1

9

50-8000

Hose Clamp, Sold in 10 pack

3

10

106-4782

Hose, Oil Return, .375" x 12", SAE 30R7

1

11

50-1005

Pipe fitting, 90°, 1/8-27 NPT x .375", Brass, UNS, Sold in 5 pack

1

12

106-2121

Screw, HH, Countersunk, 5/16-24 x 3-1/4", Cadmium Plated, Sold in 5 Pack

2

CAUTION

WARNING

Oil Filter Bracket Kit 106-4747 (for KN-Series)

Advertising