SATEC BFM136 - Manual (Page 51)

‎Chapter 4 PAS Application Software Configuring Billing Energy and TOU Registers
BFM136 Branch Feeder Monitor 51
To configure your daily profiles:
1. Select the desired season and day type.
2. Select the start time for each tariff change point and the corresponding
active tariff number.
3. Repeat the setup for all active profiles.
The first tariff change point is fixed at 00:00 hours, and the last tariff change
you specified will be in use until 00:00 hours on the next day.
The energy daily profile log will be automatically configured for the number of
active tariffs you defined in the BFM136 TOU daily profile.
Configuring the Season Tariff Schedule
To configure your season tariff schedule, select Energy/TOU from the Meter
Setup menu, and then click on the TOU Calendar tab.
The TOU calendar allows you to configure any tariff schedule based on any
possible utility regulation. The calendar itself has 32 entries that allow you to
specify profiles for working days and holidays through all seasons in any
order that is convenient for you, based on simple intuitive rules. There are no
limitations on how to define your schedule. The BFM136 is able to
automatically recognize your settings and to select a proper daily tariff
schedule for any day within a year.
1. The following picture gives you an example of a single-season tariff
schedule configured for weekends and the designated US holidays.
To configure your season tariff schedule:
1. In the “Season” box, select the season, and in the “Day Type” box,
select a day type for this calendar entry.
2. Select the time interval when this daily tariff schedule will be effective
based on the start and the end weekdays and, for a multi-season
schedule, on the start and the end month for the selected season. It