Controls and displays 03, Preset code list – Bel Canto Design PL-1 User Manual

Page 14

Advertising
background image

Controls and Displays

03

2152

En

18 MULTI DIAL
Use for scanning and slow motion control.

19 Jog indcator
Lights when multi dial is in jog mode .

20 JOG (JOG MODE)
Press to put switch jog mode on/off. When
on, use the

MULTI DIAL to advance or

reverse frames.

21 FL (DIMMER)
Press to change the display brightness

22

8

Press to pause playback; press again to
restart

23

1 and /e / ¡ and E/

Use for reverse / forward slow motion
playback, frame reverse / advance and
reverse / forward scanning.

24 SURROUND
Press to activate/switch off 2V/TruSurround.

25 CLEAR
Press to clear a numeric entry

26 ENTER
Press to select an option or execute a
command

27 TV CONTROL buttons
VOLUME
Use to adjust the volume

CHANNEL
Use to select TV channel

FUNC
Press FUNC to select the TV for remote
control operation

28

TV

Press TV to turn the TV’s power on or put
in to standby

Setting up the Remote Control to
TV

This most be set to use buttons

27 and 28.

1. Input the Manufacturer code.
While holiding down the

CLEAR button,

input the two digit code from the table next
page that corresponds to the make of your
TV.

For example, If you have a Pioneer TV, press
and hold

CLEAR, then press 0, 0 on the

remote control.

2. Confirm that the TV is responding to
the programmed code.
On the remote, press the

TV button. If the

TV swithches on (or into standby if it was on
previously), then you have the correct code.

If nothing happens when you press the

TV

button, start again from step 1 using a
different code.

• Some manufacturers have several

codes. Try each one until you find the
one that works.

Preset code list

00, PIONEER1
01, RCA1
02, SHARP3
03, ZENITH1
04, SONY
05, TOSHIBA1
06, HITACHI1
07, PHILIPS
08, PANASONIC1
09, MITSUBISHI
10, GOLDSTAR1
11, GE1
12, MAGNAVOX1
13, JVC1
14, SANYO2
15, RCA2
16, RCA3
17, RCA4

18, RCA5
19, SHARP1
20, ZENITH12
21, SANYO1
22, PANASONIC2
23, GOLDSTAR2
24, HITACHI2
25, HITACHI3
26, TOSHIBA2
27, SHARP2
28, GE2
29, MAGNAVOX2
30, TOSHIBA3
31, HITACHI4
32, JVC2
33, FUJITSU
34, PIONEER2
35, GRANDIENTE

1

7

13

Advertising
This manual is related to the following products: