Bel Canto Design PL-1 - Manual (Page 39)

The Audio Settings Menu 06
50
En
Set the distance for each speaker .
Audio Settings 3/3
Speaker Distance L
Speaker Distance C
Speaker Distance R
Speaker Distance LS
Speaker Distance RS
Speaker Distance SW
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
• Use the joystick (up/down) to select a
speaker.
• Use the joystick (left/right) to adjust the
distance from your listening position to
that speaker.
Front left/right ( L/R) speakers can be set
from 1.0 ft. to 30 ft. in 0.5 ft. increments.
Center speaker ( C) and subwoofer (SW) can
be set from – 6.5 ft. to +6.5 ft. relative to the
front left/right speakers
Surround left/right ( LS/RS) speakers can be
set from –20 ft. to +6.5 ft. relative to the front
left/right speakers.
When you adjust the front left ( L) or front
right ( R) speaker, all the other speaker
distances are adjusted relative to that
speaker.
6 Press ENTER to make the settings and
exit the audio settings screen.
• The speaker distance settings have no
effect on SACD playback.
• You can’t adjust the channel level for
any speakers that are set to Off in the
Speaker Installation menu screen
(
page 64).
• The Fix setting is equivalent to setting
all the channel levels to +6 dB. There-
fore, the Variable setting will usually
sound quieter than the Fix setting.
composite video outputs.
1
7 38
This Menu is available by using
the joystick to move the cursor
one step below "Virtual Surround"