Sensaphone SAT4D - Manual (Page 25)

25
appendix a: Test procedure
appendix a: TesT proCedUre
We recommend that you periodically test your Sensaphone SAT4D
to be sure it is functioning properly. This will ensure that when a
problem arises the Sensaphone will be ready to alert the appropri-
ate personnel.
1.) Check the SAT4D website weekly to verify the device is sending
its daily updates. There should be two entries per day.
2.) Periodically create an alarm on each of the four zones by trip-
ping the connected sensors. You must hold the circuit closed (or
open depending on the normality) for the duration of the alarm
notification process to be sure that all parties receive the alarm
message.
3.) Allow the unit to contact all programmed users. This will make
sure that the Sensaphone is programmed properly. It will also pre-
pare personnel to respond appropriately when they receive a mes-
sage from the SAT4D.
4.) Keep a log of your tests, noting the date and whether the
SAT4D passed in each category tested. An example of such a log is
shown below. (See “Test Log” at the end of this manual.)
SAT4D Test Log
Date Inputs Alarm Battery
07/19/09
08/20/09
09/19/09
Test Log Sample
If you require assistance, call Sensaphone Technical Support at
610-558-2700.